Evapoclean allows acid or organic solutions to be evaporated, concentrated and purified in a closed setting, free from any exchange with the laboratory’s atmosphere. The maximum evaporation temperature, 250°C, allows the evaporation of acid solutions (HCl, HNO3, HF, HBr, HClO4) and a high number of organic solvents.
Evapoclean minimizes the emission of corrosive or toxic fumes into the air flow of the fume hoods. The decontamination of the air extracted from the laboratory to satisfy the standards for discharge is thus considerably reduced.
For analyses of trace or ultra trace elements, EvapoClean removes the contamination of samples linked to the air flow during an “open evaporation”.
EvapoClean procures very reproducible evaporation conditions. Thanks to its unique (patented) design, the samples are evaporated at a similar and reproducible temperature. The evaporation and dry up times are reproducible. Generally, this makes the redissolution of the sample matrices easier. For the trace and ultra trace elements analysis, it makes the recovery rates controllable and reproducible for all the chemical elements.
Our devices have passed the acceptance tests in class 1 clean rooms and satisfy the standards EC EMC 89/336/EEC – LVD 73/23/EEC – EN 61010
EvapoClean is designed to be inert to the corrosive atmosphere of the fume hood and can be installed in dust-free laboratories (PFA coating, no metal component exposed to the atmosphere, controller unit can be removed from hood, power cord inserted in a Teflon sheath).
Standard models:
EvapoClean – 3 x 25 mL
EvapoClean – 6 x 25 mL
EvapoClean – 12 x 25 mL
EvapoClean – 3 x 125 mL
EvapoClean – 6 x 125 mL
EvapoClean – 12 x 125 mL
EvapoClean, Mixed – 5 x 25 mL + 3 x 125 mL
For a custom EvapoClean model, please submit your request in the “Additional information” area of your QUOTE.
The device includes the heating block, PFA and PTFE evaporation cavities and a thermal protection.
Temperature controller sold separately (see the “Controllers” section).
Elbow stand:
The “Elbow Stand” accessory has been designed to carry the elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Available models:
6 x 25 mL
6 x 125 mL
6 x 25 mL + 6 x 125 mL
Sweep, Concerned WeChat