About Us
Products
News
Service
Contact Us
Introduction
Product Advantages
Product Advantages
Product Parameters
Product Parameters
Product Q&A
Product Q&A
Purchase Notes
Purchase Notes
Asking Price
Asking Price
Biotage® Extrahera™ automates sample processing and does it with engineered precision. Skilled analysts can be redeployed to other demanding tasks such as data analysis. Get repeatable and solid results – every time.
There is no point for you to invest in two different instruments in order to process different formats. With Extrahera, switching between well plate formats and 1, 3 or 6 mL columns can be achieved in a matter of minutes.
Extrahera cleverly links and tracks the tips for re-use with each solvent. Extrahera saves you consumables costs by using only one tip per sample.
The clean and simple user interface delivered with Extrahera makes setting up your system a joyful and easy task. Save and re-use your favorite methods and generate pdf reports of your runs.
Extrahera has an enclosed processing area and an integral exhaust fan. It protects you, your colleagues and makes it a compact bench top buddy.
| Pipetting Specifications | Up to 1000 µL in one aliquot |
| At 50 µL: ±2.0% accuracy and 1.0% CV* | |
| At 100 µL: ±2.0% accuracy and 1.0% CV* | |
| At 500 µL: ±1.5% accuracy and 1.0% CV* | |
| At 1000 µL: ±1.0% accuracy and 1.0% CV* | |
| Solvent Capacity | 5 solvent pumps with automatic feed in from external reservoirs |
| Pressure Unit | 0–5 bar positive pressure |
| Format | 96-well extraction plates, 96-array plates for 1 and 2 mL wells |
| 96-position extraction racks for 1 mL tabless columns (A format) | |
| 24-position extraction racks for 1, 3 and 6 mL columns (A, B and C format) | |
| Plate Positions | 5 positions used for sample, extraction and mixing plates etc. 4 used for elutions |
| Disposable Tips | 1000 µL tips |
| Temperature | Operating temperature: 15–32 ºC |
| Storage and transportation temperature -25 ºC to 60 ºC | |
| Humidity | 10–95% RH |
| Electrical Supply | 100 to 240 V~, 50/60 Hz |
| Fuses | T4A at the power inlet (2 required) |
| Maximum Power Consumed | 300 VA |
| Pressurized Air Supply | >5 L/min, 6 ± 0.2 bar (0.6 ± 0.02 MPa; 87 ± 3 psi) |
| Inert Gas Supply | >70 L/min, 6 ± 0.2 bar (0.6 ± 0.02 MPa; 87 ± 3 psi) |
| Vacuum Supply | Partial pressure range: < 500 mbar (50kPa; 7 psi) |
| Flow rate: > 8.3 L/min (0.29 cubic feet/min) | |
| Weight | 75 kg (165 lbs) |
| Dimensions (W x D x H) | Without touch screen: 610 x 510 x 730 mm (24.0" x 22.1" x 28.7") |
| With touch screen: 860 x 570 x 730 mm (33.8" x 22.4" x 28.7") | |
| Max Sound Level | 65 dB (A) |
| Touch Screen | 12" Capacitive Touch |
| Ethernet LAN | Complies with IEEE 802.3 (ANSI 8802-3) |
| USB | USB 2.0 |
| Certifications | CE, CSA certified |
| *Values derived using a 1000 µL tip. |
Question:
Can I use my present sample vials on the system when working with Extrahera?
Answer:
Yes, as long as they are of the following dimensions 16 x 100 mm, 13 x 100 mm or 12 x 75 mm.
Browse more questions and answers >Question:
Can I use other automation tips on Extrahera?
Answer:
Yes, but precision and accuracy has been determined with the Biotage tips and these specifications are affected by the quality of liquid handling tips.
Browse more questions and answers >Question:
Can I add/work with my own solvents and consumables on Extrahera?
Answer:
Yes you can add your own solvents and consumables onto the system. The system is provided with most common laboratory solvents already preconfigured and has been optimized to work with Biotage consumables.
Browse more questions and answers >Question:
Will all Biotage applications transfer onto Extrahera?
Answer:
The majority of applications will transfer onto Extrahera. Some pre-treatment steps may not be automatable, and there may be limited instances where volumes are not compatible. It is advisable to gain a copy of a customer’s application/methods and discuss the requirement with a Biotage representative.
Browse more questions and answers >Question:
Can I print directly from the software on the system?
Answer:
No, pdf reports are exportable via USB, which can be stored electronically or printed from your local computer.
Browse more questions and answers >Question:
Can I pick and choose which wells of a plate I want to process?
Answer:
Yes, in so much that you can choose to process a specific row of wells on a plate.
Browse more questions and answers >Question:
I like the compact secure format of Extrahera. Can I use it for my general liquid handling steps too?
Answer:
Extrahera has been designed mainly to process SLE and SPE but depending on what you want to achieve, you can program a method to only perform some steps, which then essentially turns the Extrahera into a liquid handler.
Browse more questions and answers >Question:
We need to avoid cross contamination at all times. How does Extrahera take care of that?
Answer:
Biotage has taken great care during the design of Extrahera to minimize the chances of cross contamination. The design incorporates a special flow-through waste plate under the extraction plate which prevents droplet splashing and contamination between samples from the Luer outlets of a plate or column. The design and robotic arm movement is programmed to minimize the chances of cross contamination at all times.
Browse more questions and answers >Question:
What is included in the Extrahera Start-up kit?
Answer:
| Part No. | Description | Product type | Pack Size | Price | ||
         
|
414001 | Biotage® Extrahera | Instruments | 1 | Log in for price | |
| Part No. | Description | Product type | Pack Size | Price | ||
|
SER-EX-FYMP | First Year Maintenance Package - Biotage® Extrahera | Service & Support | 1 | Log in for price | |
|
|
SER-EX-IN | Installation and Familiarization - Biotage® Extrahera | Service & Support | 1 | Log in for price | |
|
|
SER-EX-SAL | Service Agreement - Limited - Biotage® Extrahera | Service & Support | 1 | Log in for price | |
|
|
SER-EX-SAP | Service Agreement - Priority - Biotage® Extrahera | Service & Support | 1 | Log in for price | |
| Part No. | Description | Product type | Pack Size | Price | ||
|
121-5202 | Collection Plate, 1 mL Square | Consumables | 50 | Log in for price | |
 
|
121-5203 | Collection Plate, 2 mL Square | Consumables | 50 | Log in for price | |
|
121-5208 | Collection Plate, 10 mL 24-well | Consumables | 25 | Log in for price | |
|
121-5210 | Collection Plate, 5 mL, 48-well | Consumables | 20 | Log in for price | |
 
|
121-5213 | Collection Plate, 2 mL Round | Consumables | 50 | Log in for price | |
|
413282 | Test Tubes (16 x 75 mm, Uncap) | Consumables | 1000 | Log in for price | |
|
|
414574 | Test Tubes (18 x 75 mm, Uncap) | Consumables | 304 | Log in for price | |
|
C40707 | Test Tubes (13 x 100 mm, Uncap) | Consumables | 1000 | Log in for price | |
|
C40708 | Test Tubes (16 x 100 mm, Uncap) | Consumables | 1000 | Log in for price | |
|
C44651 | Test Tubes (12 x 75 mm, Uncap) | Consumables | 1000 | Log in for price | |
| Part No. | Description | Product type | Pack Size | Price | ||
|
414509SP | Extrahera Calibration Vials, Plastic 1 mL, 96Pcs | Spare parts | 96 | Log in for price | |
| Part No. | Description | Product type | Pack Size | Price | ||
|
|
||||||
please enter your name！
please enter your phone！
please enter your address！
please enter your email！
please enter verification code！
Sweep, Concerned WeChat
Copyright © 2017 Shanghai Ruidi Electronic Technology co., Ltd. All Rights Reserved
Please enter your search keywords
Sure
